Improve your experience. We are very sorry but this website does not support Internet Explorer. We recommend using a different browser that is supported such as Google Chrome or Mozilla Firefox.

Shoulder Width Measurement

Shoulder Width Measurement

Description

Guidelines recommend that all passengers traveling to North Sea Installations should find a seat near a Push-out emergency exit window that suits their body size comfortably. This assessment can be made using a helicopter Bideltoid measurement service, commonly known as shoulder width measurement.

As part of these regulations, all helicopter passengers are kindly asked to undergo a shoulder width measurement conducted by specially trained trainers and medics. If a passenger's shoulder width exceeds 55.9cm (22 inches), they will be considered extra broad (XBR) and are encouraged to sit in a helicopter seat next to a window that accommodates their shoulder size.

For passengers with a shoulder width of 55.9cm or less, they will be classified as regular.

Certification

Once completed, candidates will be issued with a Shoulder Width Measurement certificate.

Price

£30.00 excl.VAT

Revalidation

Recommended every 4 years.

Who is this course for?

For personnel travelling to an offshore installation by helicopter.

Similar courses

MCA Approved Engine Course 1 (AEC1)

The MCA Approved Engine Course 1 provides a blend of practical experience and theory development over the five days.

More Information
MCA Approved Engine Course 2 (AEC2)

The MCA Approved Engine Course 2 (AEC2). is a mandatory five-day course for students enrolled in the new small vessel route to second engineer and is ideal for the owners or operators of small inshore commercial and pleasure vessels. Delivery of the content is split into both classroom activities and practical application. It comprises of approximately 50% theory and 50% practical work.

More Information
MCA Small Workboat Stability

The MCA Stability for Workboats, Pilot Boats and Small Commercial Vessels is a new 1-day course introduced by the MCA to comply with the requirement in the 2014 MCA Workboat.

More Information
Entry into Enclosed/Dangerous Spaces (EES)

Stream Marine Training offer Entry into Enclosed/Dangerous Spaces training courses from our Glasgow Airport Training campus or on the clients’ premises and can travel to vessels or offshore platforms to carry out the training.

More Information
PASMA Towers For Users Course

This course covers the responsibility for the assembly, dismantling, moving, alteration and inspection of mobile scaffold towers.

More Information
MCA Small Workboat Stability - Online via Webinar

The MCA Stability for Workboats, Pilot Boats and Small Commercial Vessels is a new 1-day course introduced by the MCA to comply with the requirement in the 2014 MCA Workboat.

More Information
GWO First Aid (FA)

First Aid Training for the offshore renewables industry

More Information
GWO Fire Awareness (FAW)

Basic fire safety training for the offshore renewables industry

More Information
GWO Working At Height (WAH)

Basic work at height training and rescue training for work in the offshore renewables and windfarm industry

More Information
GWO Sea Survival (SS)

Basic sea survival training for the offshore renewables and offshore wind industries.

More Information
GWO Basic Safety Training Refresher (BSTR)

2 yearly refresher safety training for people working in the offshore renewables and wind farm industries.

More Information
SMT Marine Evacuation System (MES)

The Marine Evacuation System training (MES) course is designed to provide initial familiarisation or support to existing training onboard following the guidelines of MGN 558. The MES course structure provides a balance of theory and practical exercises in conjunction with manufacturers guidelines and client’s safety management system procedures. The following courses can be provided: MES Descent Refresher MES Initial Training & Familiarisation Ship Specific Bespoke Packages

More Information
OPITO Offshore Emergency Response Team Leader Further (FOERTL)

This course is for existing offshore emergency team leaders that are required to revalidate their OPITO OERTL certification by completing training scenarios that they are unable to undertake offshore. The oil and gas industry recognises that a major objective is to prevent incidents occurring, and if they do occur to control them and minimise their effect. It is important therefore to set common standards in emergency response and to ensure that they are maintained.

More Information
OPITO Offshore Emergency Response Team Member Further (FOERTM)

This course is for existing offshore emergency team members that are required to revalidate their OPITO OERTM certification by completing training scenarios which they are unable undertake offshore.

More Information
OPITO Offshore Emergency Response Team Leader (OERTL)

OPITO Offshore Emergency Response Team Leader (OERTL) 3 day course to equip delegates with necessary knowledge and skills to perform the role of Emergency Response Team Leader effectively.

More Information
OPITO Offshore Emergency Response Team Member (OERTM)

This is training for members of the designated emergency response teams in offshore installations.

More Information
OPITO Minimum Industry Safety Training (MIST)

This course will provide learners with an awareness of the major accident hazards, workplace hazards and associated controls to be found on offshore installations.

More Information
OPITO Helicopter Underwater Escape Training -Compressed Air Emergency Breathing System (HUET CA-EBS)

OPITO – Combined Helicopter Underwater Escape Training (with Compressed Air Emergency Breathing System) HUET - (1 Day)

More Information
GWO Working at Height and Manual Handling Combined (WAH+MH)

Basic Training in working at height and manual handling for the windfarm industry.

More Information
GWO Manual Handling (MH)

Manual handling training for the offshore renewables and windfarms industries.

More Information
GWO Basic Safety Training (BST)

All the basic safety training you need to start work in the offshore renewables and windfarm industries.

More Information
GWO Fire Awareness Refresher (FAWR)

Basic refresher fire safety training for the offshore renewables industry

More Information
GWO Sea Survival Refresher (SSR)

Basic refresher sea survival training for the offshore renewables and offshore wind industries.

More Information
GWO Manual Handling Refresher (MHR)

Manual handling refresher training for the offshore renewables and windfarms industries.

More Information
GWO Working at Height Refresher (WAHR)

Refresher training for working at height in the offshore wind and renewables industry

More Information
GWO Working at Height and Manual Handling Combined Refresher (WAHR+MHR)

Continuing professional development and training in working at heights and manual handling of loads for personnel working in the offshore wind and renewables industries.

More Information
GWO First Aid Refresher (FAR)

Mandatory first aid refresher training for those in the offshore wind and renewables industry

More Information
OPITO Further Offshore Emergency Training with Compressed Air Emergency Breathing System (FOET CA-EBS)

OPITO (Offshore Petroleum Industry Training Organisation) – Further Offshore Safety Emergency Training, FOET with Helicopter Underwater Escape training HUET and Emergency Breathing System CA-EBS (Compressed Air) - (1 Day)

More Information
OPITO Further Offshore Emergency Training with EBS (FOET-EBS)

This is refresher training for the BOSIET (with EBS)

More Information
Combined OPITO Further Offshore Emergency Training with Compressed Air Emergency Breathing System (FOET EBS and CA-EBS)

Special introductory offer price! OPITO – Combined Further Offshore Safety Emergency Training, FOET with Helicopter Underwater Escape training HUET and Emergency Breathing System CA-EBS (Compressed Air) and EBS (Emergency Breathing system)- (1 Day)

More Information
OPITO – BOSIET with CA-EBS & MIST (5 Day Package)

50% Discount extended, NOW £450 ! OPITO – Basic Offshore Safety Induction and Emergency Training Bosiet with Helicopter Underwater Escape training HUET and Emergency Breathing System CA-EBS (Compressed Air) With Minimum Industry Safety Training (5 Days)

More Information
Working at Height Unit 2 - PPE User

Aimed to provide Learners with a greater awareness in the use of working at height PPE, PFPE, Legal requirements and to promote safe working practices through theoretical and practical sessions.

More Information

Press enter to see more results